The picture fell out several times, and finally was completely black. Fortunately I had with me several spotters, in addition to the extra passenger monitors connected.
Since I already had the error on the glasses I chosed to modify the glasses same way as Dadde at www.rcexplorer.com had done.
Glasses were dismantled, the power box was dismantled, and all connecting plugs removed. I soldered servo cables between the glasses and the power box, and soldered a simple video cable from the glasses to a female RCA jack. Previously the video signal passed through the power box, via several connectors and thin cables, it's okay to get rid of all those.
To make the glasses would sit better fixed on the head, and to avoid having a hat down over my face to shield from daylight, the glasses were spectacles mounted inside some slalom-glasses.
This looks very good so far! Looking forward to testfly the solution.
Ingen kommentarer:
Legg inn en kommentar